diy mini aquaponics system
Its has been long overdue that I should set up these as it should. I was doing a lot of testing for the last 1 year on the various siphon sizes and pump capacity to get a trouble free set.
The three set was made last year and its been a troubling period that has most of my Aquaponics work on hold. These set above I finally able to set it up as it should and whats left are just the wiring to be tidy up.
Siphon used are the 20 mm and the 15 mm strainer bell, the one in the far end uses the 20 mm siphon with a 1000 liter/hour pump.
Water inlet is quite large for such a small set, and the cycle period is very rapid.
Center and the one on the right uses 15mm siphon with 500 liter/hour pump. Both these 20 and 15 mm siphon has been tested for one season and it did survive being in a small growbed with massive root all around.
At 500 liter/hour, the inlet flow is very small. The 500 liter/hour pump is very finicky and requires constant maintenance. I am still not satisfied with its performance.
There you go, next to plant... :)
Do you find information about diy mini aquaponics system are you looking for? If not, below may help you find more information about the diy mini aquaponics system. Thank you for visiting, have a great day.
0 komentar:
Posting Komentar